# lean angle造句

- The italic fonts have 11 degree lean angle.
- Otherwise, customization can increase the bike's lean angle to enable cornering at higher speeds.
- The later K1200 engine is a 1, 157 cc center of mass without reducing maximum lean angles.
- This lean of the bike decreases the actual radius of the turn proportionally to the cosine of the lean angle.
- The finite width of the tires alters the actual lean angle of the rear frame from the ideal lean angle described above.
- The finite width of the tires alters the actual lean angle of the rear frame from the ideal lean angle described above.
- The actual lean angle between the frame and the vertical must increase with tire width and decrease with center of mass height.
- The article gives the relationship between the lean angle and the other parameters as tan? = m 2 / ( gr ).
- If the tires are only 6 inches wide, then the lean angle increase is only 3.16? just under half.
- A slight increase in the lean angle may be required on motorcycles to compensate for the width of modern tires at the same forward speed and turn radius.
- It's difficult to see lean angle in a sentence. 用lean angle造句挺難的
- If the bike is displaced slightly downwards from its equilibrium lean angle, the torque of gravity increases, that of centrifugal force decreases and the displacement gets amplified.
- This made the bike heavier and reduced the available lean angle, while it reduced the amount of vibration transmitted to the frame and the rider, providing a smoother ride for rider and passenger.
- If, having reached a given lean angle, the centripetal forces are reduced then the motorcycle increases its angle of lean until it touches the road surface, usually unseating the rider in the process.
- In addition to these technical changes, the 2017 R1200RT is now available with optional ABS Pro, which senses lean angle and adjusts intervention accordingly " ( as part of the Ride Modes Pro option package ) ".
- In this idealized and linearized model, there are many geometric parameters ( wheelbase, head angle, mass of each body, wheel radius, etc . ), but only four significant variables : lean angle, lean rate, steer angle, and steer rate.
- It is possible to calculate eigenvalues, one for each of the four state variables ( lean angle, lean rate, steer angle, and steer rate ), from the linearized equations in order to analyze the normal modes and self-stability of a particular bike design.