简体版 English Francais日本語
登入 註冊

pipe threads造句

pipe threadsの例文  
造句與例句手機版
  • These pipe thread designations do not refer to any thread diameter.
  • Collectively, these are known as National Pipe Thread ( NPT ) fittings.
  • It is commonly available with national pipe thread ends or with plain cut ends.
  • Apply pipe compound or pipe thread tape to the threads of the trap and reattach the nuts by hand.
  • The various types of pipe threads are designed for use both with or without thread sealants, as particular applications demand.
  • Many sprinklers have pipe thread inlets on the bottom of them which allows a fitting and the pipe to be attached to them.
  • CAPTION : A basin wrench makes it easy to turn the nut that connects the water line to the bottom end of the faucet's pipe thread.
  • Both British standard and National pipe thread standards specify a thread taper of 1 : 16; the change in diameter is one sixteenth the distance travelled along the thread.
  • To remove and clean the trap, you'll need a pair of channel-type pliers, a bucket and a tube of pipe compound or pipe thread tape.
  • Pipe threads are tapered _ the threads near the end are smaller in diameter than those toward the middle of the pipe _ so they tighten as they twist into a coupling.
  • It's difficult to see pipe threads in a sentence. 用pipe threads造句挺難的
  • The taper rate for all NPT threads is 1 inch of diameter in 16 inches of length ( ) measured by the change of diameter ( of the pipe thread ) over distance of thread.
  • These fittings are pipe thread, and can include an adapter from the factory for threaded steel lines in a SAE size . 4L60Es manufactured after 1995 use snap-in connections instead of threaded.
  • The widely used ( except in the U . S . ) British Standard Pipe thread, as defined by the ISO 228 standard ( formerly BS-2779 ), uses Whitworth standard threads.
  • The Whitworth 55?angle remains commonly used today worldwide in form of the 15 British standard pipe threads defined in ISO 7, which are commonly used in water supply, cooling, pneumatics, and hydraulic systems.
  • Although common pipe threads are tapered and therefore will achieve an interference fit during proper assembly, machining and finishing variances usually result in a fit that does not result in 100 percent contact between the mating components.
  • Outside the United States, some US pipe threads are found, as well as many British Standard Pipe threads and ISO 7-1, 7-2, 228-1, and 228-2 threads.
  • Outside the United States, some US pipe threads are found, as well as many British Standard Pipe threads and ISO 7-1, 7-2, 228-1, and 228-2 threads.
  • Alternatively it is a short length of female National pipe threads ( NPT ) ( in North American terms, a coupler is a double female while a nipple is double male ) or two male or female British standard pipe threads.
  • Alternatively it is a short length of female National pipe threads ( NPT ) ( in North American terms, a coupler is a double female while a nipple is double male ) or two male or female British standard pipe threads.
  • In 1969, Bob Gore was researching a process for stretching extruded PTFE into pipe thread tape when he discovered that the polymer could be " expanded " into a porous form of PTFE, characterized by extremely high strength and porosity.
  • 更多例句:  1  2
如何pipe threads造句用pipe threads造句pipe threads in a sentence和pipe threads的例句由查查漢語詞典提供,版權所有違者必究。